PSG 6 and burning to Disk
9 posts
• Page 1 of 1
- Penny47
- Honorary ProShow PHD
- Posts: 658
- Joined: Mon Sep 03, 2007 1:55 pm
- Location: Paraparaumu New Zealand
PSG 6 and burning to Disk
I have just installed Version 6 of PSG, and am having a few problems trying to burn 3 shows onto a DVD. They are not all that big, as I have burnt larger shows before. I tried burning a single little show and it worked fine, so I am not sure why I can't get it to burn a larger show. It starts off OK and then suddenly it crashes and I have to close the program down. Any ideas please I am trying so hard to get this show done and into the mail to Zimbabwe.
Many thanks Penny
Many thanks Penny
Re: PSG 6 and burning to Disk
"burn" to an ISO file first (you can select "ISO file" from the pulldown menu where you select which burner to use) then use the free Irfanview utility (my favorite) to actually burn the disk. The advantage to doing it that way is it separates the two halves of the process and you can tell which one is causing the problem. Added advantage is that with an ISO file on your hard drive, you can now create as many additional identical disks as you want without having to re-create it again. For the first few disks, I would suggest checking the "verify" box on Irfanview - it will burn the disk then go back and read it to verify it matches exactly what was supposed to be there.
mikey
mikey
You can't have too many gadgets or too much disk space !!
mikey (PSP6, Photoshop CS6, Vegas Pro 14, Acid 7, BluffTitler, Nikon D300s, D810)
Lots of PIC and Arduino microprocessor stuff too !!
mikey (PSP6, Photoshop CS6, Vegas Pro 14, Acid 7, BluffTitler, Nikon D300s, D810)
Lots of PIC and Arduino microprocessor stuff too !!
- Penny47
- Honorary ProShow PHD
- Posts: 658
- Joined: Mon Sep 03, 2007 1:55 pm
- Location: Paraparaumu New Zealand
Re: PSG 6 and burning to Disk
Thanks Mikey I am going to give it a try now...
- Penny47
- Honorary ProShow PHD
- Posts: 658
- Joined: Mon Sep 03, 2007 1:55 pm
- Location: Paraparaumu New Zealand
Re: PSG 6 and burning to Disk
OK here is what I did before trying the ISO I dropped the speed of the burning and I set everything up before I added extra shows and it seems to have worked. But now I would really like to know where to find the ISO as I use the burner from the PSG program. I am not all that familiar with the ISO. I have heard of it but never used it. I will also down load Irfanview utility. I have the part that I use for photos etc. So will look into that now. I also use Nero as my other burner. But will have to buy it at some point I imagine.
Anyone that can help with these details I would be most grateful.
Penny
Anyone that can help with these details I would be most grateful.
Penny
Re: PSG 6 and burning to Disk
I think that Mikey meant to type ImgBurn and not IrfanView, which is for images, as you wrote.
Download ImgBurn from here http://fileforum.betanews.com/detail/Im ... 28426215/1
Please pay attention to what the program installs. Don't let it install any other additional program.
Download ImgBurn from here http://fileforum.betanews.com/detail/Im ... 28426215/1
Please pay attention to what the program installs. Don't let it install any other additional program.
- Penny47
- Honorary ProShow PHD
- Posts: 658
- Joined: Mon Sep 03, 2007 1:55 pm
- Location: Paraparaumu New Zealand
Re: PSG 6 and burning to Disk
OK thanks for that I shall be very careful as I know I have a very bad habit of installing things I do not require and get all sorts of things popping up. I will give it a try in the morning when my brain is fresh. Thanks again for your help.
Re: PSG 6 and burning to Disk
Thanks Mona - yes, while Irfanview is one of my favorite utilities (also free), I meant Imgburn. Of all the things I've lost, I miss my mind the most
When you select the ISO option, it will ask you where you want to put the file - just put it in the same directory as your show is. Makes it easy to keep track of it that way.
mikey
When you select the ISO option, it will ask you where you want to put the file - just put it in the same directory as your show is. Makes it easy to keep track of it that way.
mikey
You can't have too many gadgets or too much disk space !!
mikey (PSP6, Photoshop CS6, Vegas Pro 14, Acid 7, BluffTitler, Nikon D300s, D810)
Lots of PIC and Arduino microprocessor stuff too !!
mikey (PSP6, Photoshop CS6, Vegas Pro 14, Acid 7, BluffTitler, Nikon D300s, D810)
Lots of PIC and Arduino microprocessor stuff too !!
Re: PSG 6 and burning to Disk
Penny47 wrote:----snip---- But now I would really like to know where to find the ISO as I use the burner from the PSG program. I am not all that familiar with the ISO. I have heard of it but never used it. ----snip----
Penny
If you missed what Mikey posted here:
gpsmikey wrote:...snip... select "ISO file" from the pulldown menu where you select which burner to use ...snip...
mikey
This is the menu path:
Publish -> Create DVD -> Burning -> Disc Options -> Disc Writer
Look for the drop down arrow in the Disc Writer area of settings. Upon installation, the program normally defaults this setting to the computer's DVD reader/writer. Before I change the setting to ISO, mine happens to say E: TSSTcorp CDDVDW TS-H653J. But yours may be different.
Click the drop down arrow to reveal the choice underneath for "ISO Image File". Once it's changed to ISO, it usually stays that way until another version is installed.
- Penny47
- Honorary ProShow PHD
- Posts: 658
- Joined: Mon Sep 03, 2007 1:55 pm
- Location: Paraparaumu New Zealand
Re: PSG 6 and burning to Disk
I just want to thank you all for your help with my problem. I think I have it sorted now. anyhow I have managed to burn the show that will go overseas to our cousins.
I just wish I was as clever as you all, but at least I know I can always ask and someone will help.
Penny
I just wish I was as clever as you all, but at least I know I can always ask and someone will help.
Penny
9 posts
• Page 1 of 1
Return to PSG - Troubleshooting
Who is online
Users browsing this forum: No registered users and 7 guests