"Page curl" and "page peel" transitions
11 posts
• Page 1 of 1
"Page curl" and "page peel" transitions
hi all,
I'm new here, this is my first post.
first of all, I'm totally happy with this software... even if I'm just working at my first show, i managed to do quite a lot so far, partly with my tries and partly by reading some helpful posts here.
One thing that is puzzling me a bit is page transitions...following the suggestions, and my taste too, i'm not using many transitions in the show, but one i'd like to use now and then is the page curl (or page peel), as it is a nice way of changing the situation in the show.
But what happens is that the transitions don't seem to behave the same every time...i try to explain (not easy!), one time i apply the transition and it works smoothly (the old image 'curls', or appears on the back of the 'peeled' page, while the new one appears underneath).
Some other times though it's just black on black (like unfolding a book of completely black pages), and only after the transition is over the new image appears.
Some other times the transition turns out to be just like a 'cut' when played!
Is there a bug in the transitions (which i doubt as the software seems so excellent!) or is it me doing something wrong? (more likely!).
I tried again last night and i noticed that even in the transitions that worked fine (and still do), if i try to change them and then i bring back the original one, it doesn't play fine anymore... I'm puzzled!
i haven't managed so far to find out if there's something that links the different behaviour, like the use of layers or effects (as for this, my show is pretty basic for now, i only use some zooming here and there and layers in a very few slides).
I haven't tried to reinstall yet, which I might do tonight.
Maybe someone else has experienced the same?
If needed I'll try to post an example of what i mean for you to understand better.
I'll be very grateful for any help.
thank you,
Isabella
I'm new here, this is my first post.
first of all, I'm totally happy with this software... even if I'm just working at my first show, i managed to do quite a lot so far, partly with my tries and partly by reading some helpful posts here.
One thing that is puzzling me a bit is page transitions...following the suggestions, and my taste too, i'm not using many transitions in the show, but one i'd like to use now and then is the page curl (or page peel), as it is a nice way of changing the situation in the show.
But what happens is that the transitions don't seem to behave the same every time...i try to explain (not easy!), one time i apply the transition and it works smoothly (the old image 'curls', or appears on the back of the 'peeled' page, while the new one appears underneath).
Some other times though it's just black on black (like unfolding a book of completely black pages), and only after the transition is over the new image appears.
Some other times the transition turns out to be just like a 'cut' when played!
Is there a bug in the transitions (which i doubt as the software seems so excellent!) or is it me doing something wrong? (more likely!).
I tried again last night and i noticed that even in the transitions that worked fine (and still do), if i try to change them and then i bring back the original one, it doesn't play fine anymore... I'm puzzled!
i haven't managed so far to find out if there's something that links the different behaviour, like the use of layers or effects (as for this, my show is pretty basic for now, i only use some zooming here and there and layers in a very few slides).
I haven't tried to reinstall yet, which I might do tonight.
Maybe someone else has experienced the same?
If needed I'll try to post an example of what i mean for you to understand better.
I'll be very grateful for any help.
thank you,
Isabella
- trulytango
- Posts: 2234
- Joined: Fri May 12, 2006 8:19 am
- Location: UK
Re: "Page curl" and "page peel" transitions
Yes, I think you should create a short sample show that displays what you are seeing.
Windows 7 HP 64-bit, Intel i5 2500K Quad Core, 8GB RAM, 1.0GB Ge-Force NVIDIA GTX 560i, Adobe Photoshop CS5, Producer 6 (GPU Benchmark was 336, now 324), a big old Canon 20D and a funky Canon Powershot G15
- donhall914
- Active Member
- Posts: 32
- Joined: Thu Sep 01, 2011 7:01 am
Re: "Page curl" and "page peel" transitions
I, too, have had a problem with the page curl transition. When I first got PSG about a month ago, I tried lots of transitions to see how they worked. The page curl transition worked fine. However, in the past week, I have tried it a couple of times and when the transition starts, I get a black old photo and a black new photo. All other transitions that I have tried work as designed.
Re: "Page curl" and "page peel" transitions
donhall914 wrote:I, too, have had a problem with the page curl transition. When I first got PSG about a month ago, I tried lots of transitions to see how they worked. The page curl transition worked fine. However, in the past week, I have tried it a couple of times and when the transition starts, I get a black old photo and a black new photo. All other transitions that I have tried work as designed.
Yes, donhall, that's exactly what i get! glad i'm not alone....
Like you I started using PSG a couple of months ago and in the first tries the page curl transitions worked fine (like all the others i've tried so far). In the first show i've done these transitions STILL work fine. But if i try to use them now (even in the same show), they dont work as expected.
I uploaded a very short sample on youtube for you experts to check, where i used 4 page curls (wrongly resulting in a black old photo and a black new photo) and then 2 page peels (resulting in cut transitions).
http://www.youtube.com/watch?v=tbQrJ5eGNnQ
I just tried deleting the .pxc, .phd, .cfg files and tried reinstalling the software, but i still get the same behaviour.
Any ideas?
thank you all for your help
Isabella
- marjolijn1957
- Esteemed Member
- Posts: 175
- Joined: Sat Feb 26, 2011 2:17 am
- Location: The Netherlands
Re: "Page curl" and "page peel" transitions
A little idea?
Have you looked to the Keyframes of the pictures?
Have you looked to the Keyframes of the pictures?
- DickK
- ProShow Hall of Fame
- Posts: 3143
- Joined: Mon Nov 13, 2006 7:42 pm
- Location: Northern Virginia
Re: "Page curl" and "page peel" transitions
Since this is the Gold vs. Producer section, I presume the user has Gold and no keyframe manipulation possible.
Dick
Dick
"It is the mark of an educated mind to be able to entertain a thought without accepting it." Aristotle ((PSG, PSE & Fuji HS20 user)) Presentation Impact Blog
Re: "Page curl" and "page peel" transitions
DickK wrote:Since this is the Gold vs. Producer section, I presume the user has Gold and no keyframe manipulation possible.
Dick
thanks Dick, you beated me to it...i was writing the same! as from previous posts, both me and donhall use PSG, so no keyframes i'm afraid...
any other ideas...? this seems so weird, as it used to work fine and now it doesn't...and since i reinstalled i doubt something got corrupted...
Re: "Page curl" and "page peel" transitions
The youtube video looks like you're seeing the mask instead of what the mask is supposed to be masking.
Don't know how it affects things in PSG (I have PSP) but maybe the layer has been changed. Check to see if it's still designated as a masking layer.
Joe
Don't know how it affects things in PSG (I have PSP) but maybe the layer has been changed. Check to see if it's still designated as a masking layer.
Joe
Re: "Page curl" and "page peel" transitions
Joe,
This is the Gold section.
Users of Gold can't check masks, because there are no masks in Gold.
The transitions were made in Producer and can be USED by Gold users because Photodex designed them this way. But using them is all they can do with them.
My advice is to contact Photodex and explain the problem.
Could be a video problem too, because these transitions are based on wmw video files (the page curls only). I seem to remember someone mentioning that Win 7 has some issues with wmv files created in XP, but I don't remember exactly what was the solution .
This is the Gold section.
Users of Gold can't check masks, because there are no masks in Gold.
The transitions were made in Producer and can be USED by Gold users because Photodex designed them this way. But using them is all they can do with them.
My advice is to contact Photodex and explain the problem.
Could be a video problem too, because these transitions are based on wmw video files (the page curls only). I seem to remember someone mentioning that Win 7 has some issues with wmv files created in XP, but I don't remember exactly what was the solution .
Last edited by cherub on Wed Nov 09, 2011 6:57 am, edited 1 time in total.
- DickK
- ProShow Hall of Fame
- Posts: 3143
- Joined: Mon Nov 13, 2006 7:42 pm
- Location: Northern Virginia
Re: "Page curl" and "page peel" transitions
Agree with Mona completely -- bounce this one off PhotoDex and see what they say.
This machine is Win7 and I just created a test show using 5 different page-type transitions and few others as well and all of them worked as expected.
Dick
This machine is Win7 and I just created a test show using 5 different page-type transitions and few others as well and all of them worked as expected.
Dick
"It is the mark of an educated mind to be able to entertain a thought without accepting it." Aristotle ((PSG, PSE & Fuji HS20 user)) Presentation Impact Blog
11 posts
• Page 1 of 1
Return to PSG - Troubleshooting
Who is online
Users browsing this forum: No registered users and 19 guests