PSP Template: Images in Column List with Image to Right

by **im42n8** » Fri Jan 11, 2008 11:28 am

I posted an updated Producer template to the version used in my recent "Neck of the Woods" show (see link below).

http://www.photodex.com/sharing/viewsho ... alb=135840

There is a pointer in this version that changes colors as it moves to point to the next image to be displayed. Also, the column background is kinda animated.

NOTE (20080115): This template was created with the show set for 16:9 (HD) vs 4:3 (SD). So, if your show is set to 4:3, you may have a bit more tweaking to get the column of images to show on a TV. Also, the zoom of the displayed large image may need reduction so that it doesn't interfere with the column of images.

If you haven't seen the show, below is a description of the template:

This template takes 7 images (there are two of each ... for a total of 14 image layers), each of which is displayed in an initial array in the bottom half of the screen.

These images are then placed in a column on the left.

Next the image in the lowest layer to topmost layer is displayed one after the other to the right, centered vertically with the column of images on the left. The displayed image is shadowed (by the 1st image displayed) whereas the columned images are not.

In the updated template, there are also layers used to create a background behind the column of images and to create a pointer showing which image is being displayed.

Dale

The updated link is here (Member Created Files):
http://www.proshowenthusiasts.com/viewt ... a1d6e57199
or:
http://tinyurl.com/2kohgk

by **cherub** » Fri Jan 11, 2008 11:54 am

For easier access, the above, very long link is this:

http://tinyurl.com/ytbj34

by **PhotoMagicCreations** » Fri Jan 11, 2008 12:30 pm

I have tried both of these links, and neither one seems to work. Is anyone else having trouble downloading this template?

Kelly

by **im42n8** » Fri Jan 11, 2008 1:51 pm

Kelly,

I just tried the link ... it seems to work now. Here it is again (well, it worked for me). I'm not sure what happened to the original link.

http://f1.grp.yahoofs.com/v1/0NiHR1GKnR ... layOne.pst

http://tinyurl.com/yq7yvy
(I tried the tinyUrl to get a smaller link! First time I've used it!)

Dale

by **PhotoMagicCreations** » Fri Jan 11, 2008 2:15 pm

Dale,

Thank you for your reply. I tried your link to download the template, however, I did not get the usually menu that pop up that asks whether you want to open file or save it to your hard drive. It pulled up the detailed settings of your template. I am sorry, but I have not come across this before. How do I save this template so I can place it in my templates on my computer.

Kelly

by **Penny47** » Fri Jan 11, 2008 2:47 pm

I too am unable to get to any of the links it just says "Document Not found"

Penny

by **im42n8** » Fri Jan 11, 2008 3:17 pm

This I don't get! The darned link tested fine... but NOW it sez the document doesn't exist! Bogus!

http://www.fenimorephotovideos.com/Temp ... layOne.pst

This link WILL work (my server)!

Dale

by **MG - Admin** » Fri Jan 11, 2008 3:29 pm

I've added the file to the Member Created Section of the forum.

Click Here

Mike

by **PhotoMagicCreations** » Fri Jan 11, 2008 3:33 pm

I tried your link again, but am still experiencing the same problem. When I click on your link, I get like a worded document showing the exact settings of your template. I don't get the pop up menu that asks to save this file to your hard drive. Is anyone else having this problem?

Kelly

by **briancbb** » Fri Jan 11, 2008 3:37 pm

If you see the above file from Dale as a text file (I did), select all the text, copy to 'Notepad' and save out of that as anyname.psh.

You will now have a file to load into Producer by clicking on it. When it opens in Producer, save it as a template.

This should give you the intended template file. It did for me.

Thanks Dale.

Brian

EDIT Mike's upload in the 'Member Created Files' is a .pst file.

by **im42n8** » Fri Jan 11, 2008 3:39 pm

Kelly,

Did you try the new link Mike posted (for the Members Created Files) or the link on my server? Either of those should reliably work. I don't understand what happened to those other links.

Dale

by **PhotoMagicCreations** » Fri Jan 11, 2008 4:45 pm

Yes, Mike's file worked. Thanks.

Kelly

by **GabBill** » Mon Jan 14, 2008 8:04 am

Dale,
I got the template from the Member Created Files area.

Very, very cool. I will definitely use it.

Thanx for sharing,
Bill

by **seektheburd** » Mon Jan 14, 2008 8:50 am

I just checked out your template Dale. Very nice! Thanks for sharing!

Hugs, Stephanie

by **jeanc** » Mon Jan 14, 2008 9:10 am

Love this template, Dale.

Thanks for sharing!

Jean